Parkside PHD 150 C2 Bedienungsanleitung PDF herunterladen (Seite 48)

48

GB MT

ow preventer in conformity with EN

12729 type BA must be used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available in spe-

cialist shops.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

• Use the device on a domestic water

supply or a water source with a feed

rate of at least 450l/h.

Setting up

1. Push the carry handle (2a) into the

square tube on the mounting frame.

The carry handle (2a) audlibly clicks

into place. Fix the carry handle (2a)

from the back using the two screws

(2b) enclosed.

2. Slide the holder for mains cable (5)

and the jet gun holder (11) onto the

guides on the device housing.

3. Connect the high-pressure tting (jet

gun) (12) to the jet gun (1). Use the

fork spanner from the package.

4. Connect the feed hose to the water

supply and allow water to escape from

the other end of the feed hose with no

bubbles, in order to expel the air from

the feed hose. Switch off the water tap.

5. Connect the feed hose with the help of

the quick connector for garden hose

adapter (13) with the water connection

coupling (9a) and the water connec-

tion (9b) on the device. Always use

the lter insert (8) and clean this as

required (bayonet xing).

6. Plug in and turn the turbo dirt blaster

(17) or the standard Vario nozzle (18)

or the rotating wash brush (19) to con-

nect to the jet gun (1).

7. To change the jet tube (17/18) or the

rotating wash brush (19) push in the

tube or brush and turn in the opposite

direction.

Mains connection

The pressure cleaner you have acquired

is already tted with a mains plug. The

equipment is designed for connection to

an earthed wall socket with a residual

current operated device (RCD switch) at

230V~50Hz.

Only operate the pressure cleaner

after all the above points have been

observed.

1. Ensure that the pressure cleaner is

turned off by its ON / OFF switch

(10).

2. Insert the mains plug into the mains

socket

Operation

Be prepared for the recoil

force of the emitted wa-

ter jet! Ensure that you are

standing rmly and that you

are holding the gun (1) se-

curely, otherwise you could

injure yourself or other peo-

ple.

Never operate the pressure cleaner

with a closed water tap. Dry run-

ning will damage the pressure

cleaner!

1. Turn on the water tap entirely.

2. Switch on the pressure cleaner with the

ON / OFF switch (10).

Only ever switch on the pressure clean-

er once you have connected all of the

water pipes and they do not leak.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare