Parkside PSS 250 A1 Bedienungsanleitung PDF herunterladen (Seite 9)

9 GB/IE

General safety advice for electrical power toolsGeneral safety advice for electrical power tools

and advice. Electrical power tools are dan-

gerous when they are used by inexperienced

people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use the

device. Many accidents have their origins in

poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

5. Service

a) Have your device repaired at the ser-

vice centre or by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

Appliance-speciﬁc

safety Instructions

To avoid the risk of injury or fire as well

as health risks:

When working outdoors, connect the

appliance via a residual current circuit-

breaker with a maximum breaking

current of 30 mA.

Only use an extension cord certified

for use outdoors.

Secure the workpiece firmly. Use

clamps / vices to firmly hold the work-

piece. It is thus better secured than just with

your hand.

In case of danger, immediately pull

the power plug from the socket.

Always run the power cord away

from the appliance to the rear.

DANGER OF FIRE FROM FLY-

ING SPARKS! Abrading metal

creates ﬂying sparks. For this reason,

always make sure that nobody is placed in any

danger and that there are no inﬂammable ma-

terials near the working area.

NOXIOUS FUMES!

Any harmful / noxious dusts generated from

sanding represent a risk to the health of the

person operating the device and to anyone

near the work area.

DUST HAZ-

ARD! When sanding wood and in

particular when working on materials

that give rise to dusts that are hazardous to

health, the sander must be connected to a suit-

able external dust extraction device.

Wear protective glasses and

a dust mask!

Ensure sufficient ventilation when

working on plastics, paints, lacquers,

etc.

Do not soak materials or surfaces to be

worked with liquids containing solvents.

Avoid sanding of lead-based paints or

other materials that are hazardous to

health.

Material containing asbestos may not

be worked on. Asbestos is considered a

carcinogen.

The appliance is designed for dry sur-

face sanding of wood, plastic, metal

and smoothing compounds as well as

painted surfaces.

Never work on moistened materials

or wet surfaces. Water entering an electri-

cal device increases the risk of electric shock.

Always hold the appliance firmly with

two hands while working (see also

Fig. D, E).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare